Compararon dos de los LED's más vendidos de Argentina. Muy buen análisis.
Keywords: LED, PHILIPS, SAMSUNG, COMPARATIVA
Friends Link : Cheap jewel jewelry
Friends Link : Cheap jewel jewelry
Choosing a new Tv for the home is a major decision. The two main types of Tvs on the store today are plasma and Lcd. These competing technologies arrive at similar features via two very distinct processes. The following paragraphs will discover what these technologies are and how they compare to one another.
Technologies Defined
Plasma flat screen technology uses millions of pixels, consist of glass, gas-filled bubbles suspended in the middle of sheets of glass and painted with a phosphor. When an electric current is applied, the gas becomes excited and turns into plasma. This plasma gives off ultraviolet light, which illuminates the red, green or blue phosphor coating to display the desired color.
Lcd displays consist of a liquid-crystal solution sandwiched in the middle of two plates of glass. When thin-film transistors buzz these cells with an electric charge, the crystals turn and line up to filter white light from a lamp behind the Tv screen. The number of turning determines what color seeps through; the crystal cells block the unwanted colors from the spectrum of light until only the strict color continues through to the viewer.
Picture Quality
In normal to low room lighting such as night time viewing, plasma Tvs display good photograph quality. In contrast, Lcd Tvs are ideal for challenging environments such as sunrooms and for collective display areas. In a typical home environment, a plasma Tv will yield higher photograph quality.
Video Playback
Plasma Tvs generally accomplish good with high-contrast levels and fast-moving images. Lcd Tvs have a longer response time; that is, how long it takes for a crystal to twist and allow light to pass through. Lower response times have less blur and thus are more desirable.
Longevity
Since a plasma Tv works by challenging gases and causing phosphors to glow, over time the phosphors will fade. Although it takes years for the phosphors to reach half their first brightness, ultimately the Tv photograph will come to be dim. The gases and phosphors cannot be refreshed or replaced, so the entire Tv will need to be replaced. On the other hand, Lcd Tvs last as long as their back-lights do. Since Lcds naturally filter light, there are no parts to wear out or fade. Toward the end of the lamp's life cycle, however, the light given off may turn slightly so that the white light is no longer a pure white. With today's advances in technology, both plasma and Lcd televisions may last for years, so neither type has a determined advantage.
Screen Burn-In
With plasma displays, static images such as a paused Dvd will ultimately "burn-in," or come to be permanently locked into the glass display element. This phenomenon is also known as "ghosting." The end result is that even when the static image is no longer being displayed, some remnants of the image will be descriptive to the naked eye. Lcd televisions do not experience this qoute due to the nature of the liquid crystals. Newer plasma Tvs have a reduced danger of burn-in, but if this is still a concern, then an Lcd Tv would be a safer bet.
Size
Both plasma and Lcd televisions are available in larger sizes, although the largest Tvs such as 61" favor plasma technology. All of these sizes have proven reliable, although the largest plasma Tvs consume a lot of power.
Cost
Plasma Tvs generally have lower pricing than Lcd Tvs of comparable size.
Overall, both plasma and Lcd Tvs have determined advantages and drawbacks. Anything seeing transmit to purchasing a new Tv should determine which features are most prominent before choosing in the middle of plasma and Lcd technologies.
Samsung PN51D7000 51-Inch 1080p 600 Hz 3D Plasma HDTV (Black) Feature
|
Recommend : Ladies watches jewel jewelry cheap cycling shorts
LG 42LK520 42-Inch 1080p 120 Hz LCD HDTV Feature
|
Thanks To : Ladies watches cheap cycling shorts Cheap jewel jewelry
In terms of home entertainment the days of the robust and large unit tube televisions are becoming a distant memory. Seemingly the only selection now is for a slim line, flat panel television, delivering the extreme in both doing and aesthetics within the room that it is placed.
With flat panel Tvs now monopolising the home entertainment market, the only choices that are beyond doubt left to be made are what type of flat panel television, and what constructor or model to choose. When selecting the type of flat panel television to choose, there are three main options: Plasma, Lcd and Led.
Plasma televisions were the first of the three technologies to beyond doubt hit the mass market. Plasma Tvs consolidate a technology that sees gases held between two panels of glass that is electronically converted into Plasma and emits ultraviolet light, stimulating phosphors to ultimately display light from the screen. This technology was revolutionary during its mass production in the late 1990s and sparked a huge popularity in Plasma televisions that brought about its store dominance until about 2006.
Plasma Tvs like each flat panel selection are slim line with the ability to be wall mounted. Plasmas are capable of producing the top approved of black levels, with perfect colour fertilization and first-rate viewing angles when compared with its Lcd and Led competitors.
The nature of the technology used in Plasma televisions opens it to the inherent for something known as burn-in, which is the permanent etching of imagery onto the screen due to it being displayed statically for too long. This was a major issue; particularly with early Plasma Tv models, although modern burn-in-reduction features have lessened its impact.
Despite early store dominance, determination from 2006 onwards has conveyed the overtaking of Plasma Tvs by Lcd televisions.
Lcd (Liquid Crystal Display) televisions utilise a technology that sees a complex grid of millions of Lcd shutters open and close to emit the literal, amount of light generated by cold cathode florescent lamps (Ccfl) that illuminate Lcd pixels. This technology is able to produce a higher resolution (1080p compared to 720p)than that of similarly sized Plasma televisions, although the fact that some light will all the time leak through the pixels results in Lcd Tvs not being able to achieve the black levels or colour saturation of their Plasma alternatives.
Lcd Tv's rise to power from 2006 onwards is deemed to be largely due to a wide scale discount in price and the prolonged reserve of major manufacturers such as Sony, Samsung and Lg. Despite its inferior black levels and narrower viewing angles, the higher resolution of Lcd Tvs have made them the force to be reckoned with within the flat panel television market.
Attempting to overthrow that dominance is the rise of Led (Light Emitting Diode) televisions. Employing tiny light-emitting diodes instead of the Ccfls found in Lcd Tvs, Led televisions are ready in approved back-lit versions, as well as the latest technology edge-lit Led Tvs.
The introduction of Led edge-lighting technology has allowed for the create of ultra slim line models of Led Tvs, achieving a flat panel television unlike any other on the market, with the thinnest of models measuring just 29.1mm in width.
As a relative newcomer to the flat panel television battle for supremacy, Led televisions are still offered at comparatively costly prices, and not yet ready in the ample range of sizes when exceeding 40" as the more established Plasma and Lcd options.
However, with their industrialized technology, Led Tvs are able to produce the high black levels of Plasma Tvs without the fear of burn-in, whilst also outputting the high resolutions of Led Tvs. The inclusion of the best aspects of both Plasma and Led Tvs, without their downfalls makes Led Tvs the flat panel television selection of choice; any way that selection will have to come at a higher price for the time being.
Samsung PN51D530 51-Inch 1080p 600hz Plasma HDTV (Black) Feature
|
Tags : Best brands watches Ladies watches Computer batterylife
Recommend : Best brands watches jewel jewelry Cheap jewel jewelry
Samsung PN64D7000 64-Inch 1080p 600 Hz 3D Plasma HDTV (Black) Feature
|
Related : Best brands watches Cheap jewel jewelry Ladies watches
My Links : Ladies watches lady shoes shop
It's no doubt that if you've purchased, or are inspecting purchasing a flat-panel Plasma or Lcd Tv that you've plan about mounting it to the wall. Many habitancy start off with placing their Plasma or Lcd Tv on a stand with the hopes of wall-mounting it later. Why would you want to wall mount your Tv? Well, also the fact that it looks of course cool, it's a huge space saver and of course opens up the space in your room. We'll tell you what you should think before making your decision, then how to go about it once you decide.
Some things to think before you make the decision to wall mount your Plasma or Lcd Tv are:
1. Where will you mount your Tv? 2. Where will you place your equipment such as cable or satellite box, Av Receiver, Dvd player, Line Conditioner, etc. 3. How will you route the wires from your Tv to your equipment? 4. How will you get power to your Tv? 5. What type of wall-mount will you use, and what things do you have to think when mounting it? 6. Can you, and should you do the job yourself?
We'll go over these issues one at a time, and at the end of this article, you'll know everything you need to know to make your decision and head somewhere with your plan.
1) Where will you mount your Tv?
The first step is deciding where you will mount your Plasma or Lcd Tv. Of course, this will depend on the layout of the room, but you should decide a few things before proceeding. You must think things like where the important viewing seats will be, if you'd like to be able to watch the Tv from dissimilar areas in the room or just a central seating area, what type of light do you have in the room, what's behind the wall where you'd like to mount it, and where the rest of your equipment will be.
Once you determining your viewing area, you can decide which wall you'd like to place the Tv on so that every person can see the Tv comfortably. Ideally, the Tv shouldn't be mounted too high as it will be uncomfortable viewing if you have to tilt your head up to watch the Tv. You will have to equilibrium this with your room's aesthetics, and may be willing to make some sacrifices. In many rooms, having a Tv mounted on an empty wall at the excellent level might look funny in the room, so most habitancy will mount the Tv higher to make it look good on the wall. An ideal height for your Tv would be to have the center of the Tv at eye level when seated. It might be a good idea to make a cardboard cutout the same size of your Tv so that you can visualize it on the wall. If you decided to mount your Plasma or Lcd Tv higher than that, you should use a tilt-mount. That's a mounting bracket that allows you to tilt your Tv vertically so that you can more comfortably view your Tv.
If your viewing area is very wide, or if you'd like to be able to view the Tv from other room then you will use an articulating mount. also being able to tilt your Tv vertically, you can enlarge your Plasma or Lcd Tv away from the wall and turn in left or right up to 90 degrees, depending on your mount. These also come in motorized mounts now, so you can do this with the touch of a button. An example of when this would come in handy if you have your Tv mounted in your house room and you want to be able to watch your Tv in your dining area. You will be able to rotate your Tv so that it's facing an adjacent room so you will have no qoute viewing it. other great theorize to use an articulating mount is that if you're watching Tv in a very involving room, you can adjust your Tv at dissimilar times of the day so that it minimizes the glare.
You should also find out what's behind the wall you intend to mount your Plasma or Lcd Tv to, and make sure there are at least two studs to mount to. If you're mounting if above your fireplace, I suggest having a contractor or installer survey the area to make sure it's safe. Most gas fireplaces will cause no problems, but many brick fireplaces will be very difficult to mount your Tv too, and supply nowhere to run cables. If you decide that this is where you're going to mount your Tv, please have person experienced with this take a look before you begin any work.
2) Where will you place your equipment such as cable or satellite box, Av Receiver, Dvd player, Line Conditioner, etc.
It's leading to think about where your Plasma or Lcd Tv will be in relationship to your equipment such as your cable or satellite box, Audio Video Receiver, Dvd Player, etc., because you will need to run cables between your Tv and your equipment. This will decide how difficult it will be to run wires, whether it's in the wall or out of the wall, the type and length of cables used, if you will need to add an infrared repeater or radio frequency repeater ideas for your remote control, and what type of surge protector you will use.
You of course have a lot of options when it comes to where you will put your equipment, but commonly the farther away from your Tv, the more complex it will be. For example, many Hdmi cables have a maximum recommended length that the cable can carry a 1080p signal. Anyone longer than that you'll need to have boosters or converters. For many people, since the purpose of wall mounting your Plasma or Lcd Tv is to eliminate cluttery, they will place the equipment in a closet or incommunicable in a cabinet. This will wish creative wiring and will also wish that you take measures to heighten your remote control, otherwise you may not be able to change channels or control your system. So for practical purposes, it's commonly easier if your equipment is close to where you will mount your Tv.
3) How will you route the wires from your Tv to your equipment?
Either way, you'll have to make some connections from your Tv to your equipment. If you decide to run the cables out of the wall, I'd suggest using a molding to conceal your wires. These are hollow plastic mouldings that have double-sided tape on the back so they stick to the wall, and you can run cables inside of them to conceal your wires. They can ordinarily be found at your local hardware store or an electrical store. They are also paintable so they will do a pretty good job of concealing your cables. If you are going to place a stand below your Tv or close to your Tv, these are a good alternative to running your cables in the wall.
If you will run the cables in-wall, there are many things to consider. First of all, you should check with your county to make sure that all of your work is being done according to your county's regulations, and whether or not a permit is required. This can be an leading factor when you want to sell your house, as well as if there is ever an issue where you will need to make a claim with your insurance. Many installers will do things that can cause problems for you down the road. For example, many installers will run your Ac power cord in the wall from your Tv to whether an outlet or a surge protector. This is unsafe and violates construction code, and in the event you had a house fire, this might cause big problems getting your assurance to cover things. Also, you should use Ul/Cl3 rated cables inside the wall. These are rated to be safely ran inside the wall. Many cables that are not Ul/Cl3 rated can lead to a fire, so you should not use those.
Also think the lengths and potential of wire you will require. In most cases, lengths won't be an issue if everything is in the same room, but if your lengths start to come to be very long, you should take the time to find out if there's a maximum recommended length for your cables, especially when you're talking about 1080p Hdmi.
Also, if you're connecting your equipment with an Hdmi Cable, think some recipe of securing your cable. This may be Anyone from using a wire tie to gather your Hdmi Cable to the Mount so that it removes stress from your cable and helps keep it from falling out, to using a Locking Hdmi Cable or Universal Locking Adapter which attaches to your Hdmi Input and locks your Hdmi Cable in place, as well as eliminating stress on your Hdmi Input.
4) How will you get power to your Tv?
If you're running all of your cables covering of the wall, in most cases you can run the power cable inside of your molding and plug it into an outlet, or we suggest using a potential surge protector or line conditioner. If you will be running your cables inside the wall, I suggest having an electrician install a surge-protected outlet, such as ones made by Monster Cable and Panamax, behind your Tv so you can safely plug your Tv into an outlet, and at the same time safe your Plasma or Lcd Tv from damaging surges and electrical spikes. Click here to see blueechoav.com's choice of in-wall surge protectors. You should also avoid running your cables alongside high-voltage lines, as they can introduce noise into your sound and picture, taking away from your experience.
5) What type of wall-mount will you use, and what things do you have to think when mounting it?
There are many very high potential brands of mounts available, and we suggest that you take the time to explore to find the right mount for your Tv. Most mounts are fairly universal, but we suggest confirming that the mount will work for your Tv before you purchase it. Most of the good mount manufacturers like Sanus Systems, Chief Manufacturing, Peerless and OmniMount will have mount finders on their websites, which allow you to find the right mount for your model Tv. potential mounts such as mounts from these clubs are manufactured using the best materials and engineering, and they supply you with features such as cable management, one touch adjustments, and they offer very flexible mounting options for off-center mounting, etc.
The most tasteless types of mounts ready for your Plasma or Lcd Tv are flat mount, tilt mount, articulation mount and motorized mount. You can also find ceiling mounts, desktop mounts, even a motorized under-bed mount, but we'll just talk about the basic four here. Flat-mounts are the lowest profile mounts, typically around 1 inch deep from the wall to the back of your Tv. These mounts have no options for adjusting your Tv, so once your Tv is mounted, it cannot be moved from that position. Tilt mounts are ordinarily 1.5 to 2 inches deep, and allow you to adjust your Plasma or Lcd vertically, ordinarily up to 10 degrees, up or down. These are great when your Tv is mounted higher or lower than the optimal viewing height.
Articulating mounts and motorized mounts allow you to adjust your Tv vertically or horizontally. Mounts are ready that allow you to turn your Plasma or Lcd Tv 90 degrees left or right. These mounts are ordinarily very massively built, as they have to retain the weight of your Tv while it's extended away from the wall. They also will have the most space between the wall and the Tv, ordinarily 4.5 to 6 inches. This can be eliminated by using an in-wall mounting box ready from many manufacturers for their mounts. These in-wall recessed boxes allow your Tv to sit flat against the wall when fully collapsed, and still allow you full adjustment of your Tv for optimal viewing. These mounts are also great for involving rooms as they allow you to adjust the viewing angle of your Tv depending on the time of day and how the light is hitting your Tv screen, making for much less glare in involving rooms. The motorized mounts allow you the same adjustments, but from your remote control. Pretty soon you'll never have to get up from your couch again!
I have a few strong recommendations when purchasing an articulating mount. If your Tv is on the high side of the recommended range, go for the next mount up. For example, if you have a 50 inch Plasma Tv, and you have the choice of an articulating mount with a range of 42 to 50 inches, or the next mount up is recommended for 50 to 60 inches, go with the 50 to 60 inch mount option. I've seen far too many cases where person is on the high range of the mounting option, and over time the mount begins to sag and make very loud squeaking noises when adjusted. Even though it works and will retain your Tv, you will not be happy if your Tv starts to sit on your wall and is crooked, or sags when pulled away from the wall. Also, if you're not sure you'll use it, but you think you might want the potential to turn your Tv, spend in the articulating mount. If you get a flat or tilt mount, and later decide you want to turn it, you're stuck without that capability. Last recommendation, make sure you allow adequate cabling to enlarge with the Tv. Otherwise, your cables will come unplugged every time you pull your Tv away from the wall, or they will limit your range, neither of which is a great option.
6) Can you, and should you do the job yourself?
Mounting a Tv to the wall is not a difficult job. Running wires in the wall can be more difficult, and can of course be risky if you're dealing with high voltage cables. We suggest that you have your Tv expertly installed, especially if you're running cables in the wall. I've seen many installs go wrong by do it yourselfers, and they end up costing much more to fix or replace equipment than if they would have paid a expert to install it.
With that said, I realize that many habitancy will still tackle this themselves. Mounting the Tv is an easy process. ordinarily the mounts come in two parts, the main mounting plate, which attaches to the wall, and the mounting plates which attach to your Plasma or Lcd Tv. The Plasma or Lcd Tv with the brackets attached is then ordinarily hung onto the wall plate, and secured with the provided hardware. All of the major mounts I've worked with supply very good instructions, but I'll give a few things to watch out for.
Make sure that you find the center of the stud when attaching the wall plate, and make sure that you span at least two studs for larger Plasma or Lcd Tvs. When hanging the Tv to the wall plate, make sure that you have two habitancy to lift the Tv. Be sure you know what's behind your wall before you start drilling or cutting into your drywall so you don't accidentally cut into a high voltage line, or gas or water pipe.
If you're running cables in the wall, you should have an electrician install an outlet behind your Plasma or Lcd Tv. You should also plan how you will run your cables, and make sure that your cables are the right cables to run in-wall. This should help you plan where you will mount your Plasma Tv or Lcd Tv, as well as exactly what you need to do the job.
Samsung PN51D530 51-Inch 1080p 600hz Plasma HDTV (Black) Feature
|
Original post : Ladies watches Computer batterylife Best brands watches
Tags : Cheap jewel jewelry Best brands watches Computer batterylife
LG 32LK330 32-Inch 720p 60 Hz LCD HDTV Feature
|
Related : Best brands watches jewel jewelry
LG 42LK450 42-Inch 1080p 60 Hz LCD HDTV Feature
|
Tags : jewel jewelry
Everything there is to know about Lcd and plasma Tv is just a click away! If you are inspecting purchasing a flat screen Tv, here's all the guidance you'll need.
Lcd and Plasma flat panel Tvs have evolved considerably in recent years. Even if the plasma technology retains an advantage in the rendering of more natural colors, deeper black, and very large viewing angles, Lcd technology, along with Led backlighting, also produces enhanced rich colors and deep blacks.
Rendering Color
Generally, plasma technology offers richer and more natural colors. However, with some upscale Lcd Tvs, the gap is narrowing considerably. This applies to models that offer very qualitative backlight, along with those with Led technology (which use Leds for backlighting instead of fluorescent tubes). However, the entry-level Lcd displays a less full, range, with drifts of color.
Deep blacks and contrast
Historically, plasma screens have a head start on the Lcd on the depth and shades of black (no backlight to turn off wholly pixels), and show a better distinction ratio. But from a purely optical point, this advantage can not be verified in the dark. The minutes of black may also show themselves better on Lcd screens in a lighted room. Obviously, this information can be disproved by the exceptions relating to the ability of the Tv.
Gloss, matte and satin
Note that the consuming tiles, also called Glossy, improve distinction and density of black in a dark room. But they are more sensitive to light reflections which can be very bothersome while the day. Matte tiles for their part restrict these reflections and accentuate the deep blacks and contrast. The right balance is found in slabs called satin which combines the advantages of two other types of tiles.
Lifespan and Consumption
In terms of lifespan, the plasma has made advance since its longevity is similar to that of Lcd screens: practically 25 years at 4 hours of use per day. It is any way advisable to opt for a plasma if you live in high altitudes. The Lcd is better for the midpoint buyer especially models with Led backlighting. Count an midpoint of 200 Watts for the 32-inch, 250 watts for the 40-inch and 350 watts for 52 inch.
Use
If you are fond of home theater, plasma is an exquisite choice. It keeps the price advantage compared to Lcd panels for very large (> 46 inches) screens. These are also less affected by the phenomenon as marking residue image disappears more or less quickly depending on the model (Logo channel, dashboard video games...). This phenomenon is most marked in the first hours of use, a bit like running a speaker. You should be right in the first six months. any way it should also be noted that this marking phenomenon is reversible and that the recent television offer straight through their menu, tools to address this problem.
The Lcd is more qualified to daily and heterogeneous use (Tv, Dvd, video games). But more and more technology oriented films tend to deep blacks and natural colors of plasma. It is a hard option but hopefully, you'll make the right option for your flat panel tv.
LG 42LV4400 42-Inch 1080p 120Hz LED-LCD HDTV Feature
|
Credit : Ladies watches
Friends Link : jewel jewelry Cheap jewel jewelry
LG 42PT350 42-Inch 720p 600 Hz Plasma HDTV Feature
|
If you're seeing to buy a flat-screen television, you probably have already asked yourself which is better, Plasma or Lcd. We shall effort to shed some light on this subject for you.
Nuts and Bolts - The technology of Lcd and Plasma Systems
While both Liquid Crystal Display (Lcd) and Plasma panels look similar there is a basal distinction in the way they work. Both use precise electrical charges to operate a matrix of cells to furnish a picture. However, in the case of plasma screens the cell contains plasma gas while the Lcd cell is a fine layer of liquid crystal held in the middle of two layers of glass. This basal distinction produces differing results which have advantages and disadvantages depending on their application. So let's try and find out which system is best for your needs.
Picture This - Comparing Image Quality
If this article was about Flat Screens verses Cathode Ray Tube (Crt) Tv sets there would be no contest. Both Plasma and Lcd screens furnish far excellent and precise images than the older Crt technology can hope to - with a greatly reduced footprint. But here we are interested in the the relative merits of flat screens. There used to be an easy capability distinction to make in the middle of Lcd and plasma screens based on the amount of light each system produces from its cells. Plasma used to have the benefit of producing a brighter image due to the potential property of its cells to furnish their own light. In order to furnish a visible image Lcd cells have to be lit from behind - traditionally by fluorescent tubes. This has the disadvantage that even black cells have a small light bleeding through them which reduces contrast. However, backlight technology for Lcd has improved significantly in recent years with the introduction of Led banks replacing the older fluorescent tube system. The supervene is that there is negligible distinction in the capability of blacks in the middle of the two systems - although purists will still tell you that Plasma rules this roost.
Cooking with Gas - The advantages of Plasma
We have covered the benefit of great distinction operate with Plasma's capability to furnish blacks that are deeper and more true. Someone else benefit of gas over crystal is that it reacts to electrical stimuli faster. In lowly terms this means that it can turn on and off faster. This speed benefit reduces the blurring supervene that some flat screens furnish when displaying fast fascinating images. As with the backlight technology issue, advances in Lcd technology has reduced the millisecond response gap in the middle of Plasma and Lcd cells to such a minimal level so as to be roughly indistinguishable. Of policy our purist friends will continue to argue the toss and will be more than happy to furnish millisecond response charts to prove their point. For us mere mortals the distinction would be hard to find with the naked eye.
Plasma enthusiasts are quick to point out that their beloved system has a great image fidelity at wider viewing angles. We've all seen the supervene on flat screen pictures as we move farther to the side of the panel. The glow and distinction begin to significantly deteriorate and finally we sense what some characterize as a 'solarising effect' where the darker end of the image spectrum inverts and all sorts of weird effects are produced. Historically this was all the time more problematic in Lcd systems with plasma being able to furnish a far more true image at far greater angles. But, we are going to have to say it again; advances in Lcd technology...well, you know the rest.
Crystal Clear - The Advantages of Lcd
The major benefit of Lcd over plasma is that the system is far more covenant and personel cells can be faithfully reproduced at smaller sizes. Someone else benefit is that Lcd screens can make use of plastic where Plasma uses glass. What does this mean? It means that you can get more pixels into a smaller screen size, which means great resolution the amount of space you have. It also means that the units are less bulky, lighter and furnish smaller footprints. Need to save space? Need a Tv for your caravan? Buy Lcd.
Fans of Lcd will be more than happy to point out that Plasma screens sense something called 'screen burn-in', something unassociated with Lcd screens. This phenomenon is caused when a singular image is left on screen for a long period which burns a 'ghost' of that image into the plasma cells. In the past this became such an issue on computer monitors that it gave rise the 'screensaver', which is now more a novelty than a system for as a matter of fact rescue your screen from burn-in. Plasma had made huge advances in reducing this effect, it is now hardly an issue worth worrying about.
Are you an eco-warrior? Do you check that every appliance is turned off at night? Then Lcd may be for you. Lcd screens consume far less power than their Plasma cousins and furnish less heat. Lcd screens also have a longer life span chronic up to three times the amount of hours it takes to loose half their glow than Plasma screens. This not only gives Liquid Crystal the moral high ground in the green debate but also makes Lcd screens more thrifty to run with less power demands and longer periods in the middle of renewals.
Pocket the distinction - What about cost?
Plasma has an increasing cost benefit as the screen size gets bigger, so much so that the price of Lcds beyond the 50 inch mark become roughly ludicrous. This is why plasma has become synonymous with large screen entertainment. At the small screen end of the shop it becomes a much harder fight with Lcd units producing good economic results especially when taking into list their longer lifespan and sacrifice power consumption.
Skip to the end - Which is best for me?
If you are turning your front room into your own sports bar and fill you wall with premiership footy or possibly you're trying to recreate the golden age of cinema; then plasma is probably for you. Unless you are seriously loaded Lcd is simply far to high-priced for screens over 50 inches to be viable for most pockets.
If you are after something sleek, elegant and covenant to compliment your minimalist living arrangements or just need to conserve space on your narrow boat then Lcd is more likely to suit your needs. And, you can say you're rescue the planet at the same time.
Another notice is light. Do you live in a dark dungeon with only candles to light your way or do you live in a glass solarium surrounded by blinding sunlight? The conference over which platform performs best in strong light goes back and forth with each new generation of screen and each new technological advance. Plasma used to have an edge in the light until Lcd produced Led backlighting. There was also the issue of Plasma screens being glass as opposed to Lcd plastics so you'd have to worry about the position of potential ref elections but then Pioneer brought out their non-reflective Kuro plasma range and we are back where we started. The rejoinder is that it is much of a muchness, but if you have the opening to test and compare the two systems in a similar environment to your chosen location then take benefit of this and determine for yourself which best suits your environment.
Finally there is the Hd issue. At the moment there is small Hd content ready to take benefit of Lcds dominance in the resolution stakes but 1080p will finally become the approved signal resolution. If it were the case now then we would recommend Lcd for its native capability to apply pixel for pixel resolutions at lower cost. Any way plasma manufacturers are producing ever higher resolution screens at ever smaller sizes and will be able to furnish screens that don't need 'scalers' to watch Hd. By the time Hd becomes the norm, we predict there will be small to select in the middle of the two platforms in this regard.
If you're a dedicated techie and simply have to know that you are seeing every pixel, get the Lcd. If you don't mind a bit of scaling but just want your picture as a matter of fact big stick with the plasma.
LG 32LK330 32-Inch 720p 60 Hz LCD HDTV Feature
|
Friends Link : cheap cycling shorts Ladies watches
Recommend : Ladies watches
Recommend : cheap cycling shorts
When inspecting the history of plasma television screens, you have to understand the history that is behind this qualified invention. The first plasma screen television has come quite a long way. However, the conjecture for the invention was not naturally to supply men with breathtaking sports viewing.
The plasma Tv industrialized as a result of the computer generation. It is thinkable, that this based viewing gadget is not a new idea. It has been around for quite some time. Perhaps a bit of a history chapter is in order for you to understand how this application came to be available for the masses.
It all began in 1964 at the University of Illinois. At this time, computer monitors were easy televisions. You have to perceive that the televisions at this time were cathode ray tubes. They had to continuously refresh themselves in order to display correctly.
That was a big question when using a television as a computer monitor. Sure it was okay for watching tv shows, but the resolution for computers was terrible. By the end of the year the first plasma monitor was in operation.
Today's plasma Tvs have millions of cells that include the color and resolution of the screen. That first plasma monitor was only one cell. However, it was still a step in the right direction.
There was a set back, though. Liquid crystal displays became the more accepted recipe and this technology was put on hold. Fast transmit a few years and flat screen television sets became widely popular.
Plasma Tv has made a huge impact on how people watch television and use their computers. Hdtv has come to be a very popular item, as obvious by the sheer amount of plasma television screens in retail stores.
The price, once a huge question due to how expensive they were, is now becoming much more affordable. There are a large amount of people who now own these qualified flat screen televisions.
The world owes the scientists at the University of Illinois a great big thank-you. Had it not been for their need to have a new computer monitor, the world may never have seen a plasma Tv.
The big screen television sets would still be the Tv of selection and a clear picture would still have been a dream instead of a reality. Those scientists did it and now people around the world can enjoy great television viewing at a great price.
Samsung PN51D6500 51-Inch 1080p 600 Hz 3D Plasma HDTV (Black) Feature
|
Thanks To : lady shoes shop
Friends Link : Computer batterylife Ladies watches
My Links : cheap cycling shorts
Credit : lady shoes shop Ladies watches cheap cycling shorts
Visit : Cheap jewel jewelry
Friends Link : jewel jewelry Best brands watches Ladies watches
Panasonic VIERA TC-P65GT30 65-Inch 1080p 3D Plasma HDTV Feature
|
Tags : jewel jewelry Best brands watches Cheap jewel jewelry
Related : Ladies watches
Panasonic VIERA TC-P65ST30 65-Inch 1080p 600 Hz 3D Plasma HDTV Feature
|
Credit : cheap cycling shorts Best brands watches
If you are currently seeing to rent a plasma television, or buy one, you might want to read additional to understand what it is that you are shopping for, and why you might find it to be superior to a former set. Over the past three-quarters of a century, most televisions have been built using the same old technology; a cathode ray tube, or Crt. In such a model, a gismo fires a beam of negatively charged particles (electrons) inside a large tube. Those electrons then agitate phosphor atoms positioned along the wide end of the tube, or the screen, causing them to illuminate. The image on the television screen is produced by illuminating separate areas of the phosphor coating at separate intensities with separate colors.
Crts may yield clear colorful images, but their major drawback is that they are just plain big. They take up a lot of space. If you want to make a Crt television screen larger, you need to make the tube even larger so that the firing gismo can reach the whole thing. Therefore, it is approximately impossible to have a large-screen Crt television that leaves adequate space in the room for viewers.
That is why plasma flat panel televisions became so popular. Plasma televisions have large screens, comparable to even the largest Crt models, but at a fraction of the thickness (about six inches or 15 centimeters). Plasma televisions use facts in a video signal to light up thousands of tiny dots (or pixels) with a high-energy beam of electrons.
Most plasma screens have three colors of pixels evenly distributed on the inner surface: red, green and blue. On a plasma screen, the pixels are illuminated to form the image that the viewer sees. The television is able to yield any other color straight through combining those three in separate ways, and by varying the intensities of the illuminating lights.
These new televisions get their name from the main element in their fluorescent lights: plasma. Plasma is a gas made up of free-flowing ions (electrically charged atoms) and electrons (negatively charged particles). When the plasma set is turned on, electrical current runs straight through it, so the electrons are rushing towards the assuredly charged areas of plasma, and protons in the plasma rush towards the negatively charged areas. Constant collision between the two excites the plasma, causing them to publish light photons; the colors that you eventually see on your screen.
Inside a plasma television, xenon and neon gases are contained in assuredly hundreds of thousands of small cells squeezed between long electrodes, which are in turn squeezed between two glass plates. Address electrodes are arranged vertically and make up the back layer, and transparent display electrodes are arranged horizontally along the front. Together they form a basic grid.
The plasma display computer charges the electrodes that intersect particular cells so as to ionize them. This happens thousands upon thousands of times within a particular second. The resulting electric current causes charged particles to flow rapidly and make the gas atoms publish ultraviolet photons. Those photons in turn interact with phosphor material coated on the inside wall of the cell. The resulting reaction causes the phosphors in the plasma display to give off colored lights; the three colors that we described earlier. The variations in the pulses of current flowing straight through the electrodes and cells causes hundreds of separate combinations of the three colors, and is thus able to replicate the whole color spectrum.
What assuredly matters in the end is that manufacturers can use this technology to yield a very wide screen using extremely thin materials. The final stock is manageable and space-friendly. The resulting image on the screen is clear and appealing and looks good just about any way you look at it. When plasma televisions first came out, the cost of purchasing one assuredly was prohibitive to the average person. However, the technology becomes more and more affordable with every model year. And plasma rental is also becoming very competitive.
LG 42LK450 42-Inch 1080p 60 Hz LCD HDTV Feature
|
Credit : Ladies watches
Purchasing a new television involves numerous decisions. Once consumers have waded through the discrete features and made their selection, there is yet someone else decision that will be necessary. Seeing the right location and formula of placing a new plasma television is an foremost step in assuring optimal viewing as well as the security of the new screen.
There are a number of viable options for the placement of a plasma television. These space rescue flat screens can be mounted on the ceiling, on the wall, or placed on a stand. Some methods of mounting the screens are less costly, others allow for greater capability to save space, and some contribute more flexibility to assure that the television can be viewed at separate angles and heights. Seeing at each of these options in expand will help consumers make the selection that will best suit their needs.
If a wall or ceiling mount is preferred it is foremost to perceive that a plasma television can be heavy for its size and therefore wall studs or a ceiling joist must be gift to keep it. Any added hardware needed for premise should be available with the mounting gismo purchased but will be dependent upon whether the television will be mounted on wood or metal studs/joists or concrete block. Therefore, consumers should go into the buying situation knowing where they wish to place their new plasma television and what type of buildings is present.
A ceiling mounted plasma television can save floor space. A ceiling mount often has an postponement pipe in expanding to the mount itself to allow for comfortable viewing. Some owners use a "plasma lift" with a ceiling mount selection that keeps the screen incommunicable until they are ready to use it.
Wall mounts can be flat, tilt, swivel or an articulated arm. A flat wall mount is generally the least costly and is the many space saver as it adds only 2 inches to the depth of the display but because it is often fixed, does not offer a flexible viewing angle. Getting a tilt mount for a plasma television adds about 4-6 inches to the depth but is often used when needing to mount the display above eye level; such as over a fire place.
An articulating arm mount allows users to keep the display pulled back flat against the wall but also provides the flexibility of pulling out the display and turning/tilting it as needed.
Table stands are generally customized to the specific plasma television that is purchased but do tend to take up a bit more space. Some stands offer options that allow tilt and other movement of the display including "plasma lifts".
Obviously any mount purchased will need to fit the specific plasma television selected. The television will have a pattern of holes on the back that will need to correspond to the screws on the mount. Some mounts also have adapter plates available that will match up to favorite plasma television models.
Selecting the proper mount for a plasma television can help to assure that the television is garage and positioned so as to cut the risk of being struck or knocked over. A proper mount can also help to assure optimal viewing and relieve and should be determined determined to assure years of viewing pleasure.
Samsung PN51D550 51-Inch 1080p 600 Hz 3D Plasma HDTV (Black) Feature
|
Original post : Best brands watches
You want to make sure you have adequate inputs for your needs. Hdmi cables are the latest high-tech digital A/V connectors on the market. Hdmi also has great resolution than component and composite signals. Ordinarily televisions come with 2 or more Hdmi inputs to associate to your other 1080 p devices to get more clarity, look for 3 Hdmi inputs or more. Component inputs have an analog signal and 720 p resolution. Composite inputs have 720 p resolution and an analog signal as well, except they don't hold an audio signal. You also want to make sure the television comes with an visual or analog output for a home theater system. If you plan to associate to the Internet, make sure the television comes with an Ethernet port to hook your Pc or Mac up to. Lastly you may want to share pictures and watch home videos with your friends or family, so for that check for Usb ports as well.
Consider buying a home entertainment ideas for your new Tv. Home theater receivers come with a handful of inputs and outputs to associate your other devices. You can plug-in all of your digital devices to a receiver and surely have just one Hdmi cable plug into your Tv. There are a estimate of receivers on the shop that has a microphone that can tune your speakers for you so you don't have to. Plentifulness of home theater receivers come with an ethernet port to help you to share and associate with friends or house over the Internet.
Lcd Tvs are produced in approximately any size on the market. Plasma screens however, start at thirty-two inches and go up in size from there. When selecting the spoton size television, take a estimation between where you will sit and where you want the Tv. Then divide that estimate by 2, this will give you the approximate size Tv to buy. Ultimately get an additional one estimation (diagonally) of the place the television will set so you'll know to make room for it to fit or not.
Xenon and neon are the two gases utilized to make plasma for plasma televisions. A matrix of plasma filled cells and electrodes is what makes up its glass screen. This is the infer why plasma Tvs can be built so thin. A beautiful one million colors are created by the plasma television, a 2nd screen is also installed on the Tv for added unlikeness which makes plasma screen displays perfect for rooms with low light. Plasma Tvs virtually have no motion blur, due to their high refresh rates, so fast performance or sporting events will show very well on them.
Don't waste your hard-earned money on precious Hdmi cables. A Hdmi cable carries a digital signal between 2 devices. The cable will pass or fail inspection. Standard Hdmi cables are great for what they're made to do. The top rating you can purchase for Hdmi cables are 1.4 compliant, transmits 1080 p, and can be located on the internet at a decent price.
In conclusion, a one year industry warranty comes with every Tv purchase. And you regularly get both, parts and labor. Just remember, the manufacturers warranty will overlap with the first year of an extended warranty because the extended warranty starts the day the television is sold. So you will know to subtract 1 year from the extended warranty if you want to buy one. Thank You.
Samsung PN51D550 51-Inch 1080p 600 Hz 3D Plasma HDTV (Black) Feature
|
Tags : Ladies watches